Research / 2019 / Article

Review Article | Open Access

Volume 2019 |Article ID 6482975 |

Z. T. Ma, Z. X. Geng, Z. Y. Fan, J. Liu, H. D. Chen, "Modulators for Terahertz Communication: The Current State of the Art", Research, vol. 2019, Article ID 6482975, 22 pages, 2019.

Modulators for Terahertz Communication: The Current State of the Art

Received05 Nov 2018
Accepted18 Mar 2019
Published29 May 2019


With the increase of communication frequency, terahertz (THz) communication technology has been an important research field; particularly the terahertz modulator is becoming one of the core devices in THz communication system. The modulation performance of a THz communication system depends on the characterization of THz modulator. THz modulators based on different principles and materials have been studied and developed. However, they are still on the way to practical application due to low modulation speed, narrow bandwidth, and insufficient modulation depth. Therefore, we review the research progress of THz modulator in recent years and evaluate devices critically and comprehensively. We focus on the working principles such as electric, optical, optoelectrical, thermal, magnetic, programmable metamaterials and nonlinear modulation methods for THz wave with semiconductors, metamaterials, and 2D materials (such as graphene, molybdenum disulfide, and tungsten disulfide). Furthermore, we propose a guiding rule to select appropriate materials and modulation methods for specific applications in THz communication.

1. Introduction

The terahertz (THz) wave is firstly used to describe the spectral line frequency coverage of Michelson interferometer by Fleming in 1974 [1]. It is referred to as the “THz gap” in the electromagnetic spectrum until the mid-1980s [2, 3] due to the lack of effective methods for generating and detecting THz radiation. With development of femtosecond laser, the technology of THz wave generation and detection has been improved [4]. Generally, THz wave is referred to as the frequency range from 0.1THz to 10THz (corresponding to wavelengths between 30 μm and 3 mm), which is the field of the transition from electronics to photonics [5, 6]. THz wave position in the electromagnetic spectrum is shown in Figure 1. THz wave occupies a crucial frequency range, because it usually carries vital physical information [7] which can be used in cutting-edge technologies [8, 9] such as wireless high-speed communications [10, 11], biomedical diagnostics [1214], security imaging [15, 16], signal detection [17], and product quality control [18, 19]. However, the existing optical and microwave theories are unsuitable for THz wave perfectly [8].

In particular, THz wave is responsible for communications to achieve 10 Gbps wireless transmission speeds that are 100 to 1000 times faster than the current ultrawideband (UWB) technologies. Naturally, THz band as unoccupied spectrum resources is new choice for communication. THz communication has the merits which combined that of microwave communication and optical communication [2022]. The frequency of THz wave is 1~4 orders higher than microwave communication, which exhibits a larger communication capacity. The narrow beam and good directivity of THz wave lead to strong anti-interference ability and high security. THz wavelength is relatively short. Therefore, the size of antenna is small, which makes THz communication system relatively simple and compact. THz communication has maybe grown up as next generation communication technology [2326]. To clarify the differences among THz wave, microwave, and visible-infrared light in communication, the comparison of different carrier communication characteristics is presented in Table 1.

CarrierMicrowave THz Optical

Transmission modeWireless networksWireless networksWired networks
Transmission distanceLong rangeVisual rangeUltra-long range
Message capacityMbit/sBetweenGbit/s
SecurityLowLow-radiationHigh photon energy

As seen from Table 1, it illustrates that THz wave technology is equivalently suitable for communication occasions with various special requirements such as close-range secure communication and space-based communication [27, 28]. In THz communication system, modulators play a key role. Consequently, it has become a “hot” research field. More and more materials have been used to develop THz modulation devices currently, such as photonic crystals, metamaterial structures, phase change materials, high electron mobility transistors (HEMTs) structures, and graphene.

After reviewing and comparing recently developed THz modulators, we presented merits and drawbacks of different THz modulators. These THz modulators were classified by various approaches such as electronic, optical, photoelectric, thermal, magnetic modulation. The materials used in modulators focus on semiconductors, two-dimensional (2D) materials, and metamaterials. At last, the future development direction and application of THz modulator was proposed.

2. THz Modulation Technique

The THz communication mainly depends on the THz modulation and demodulation technology, THz detection and reception technology, and THz generation technology. The rational use of modulators can effectively reduce the complexity, cost, and geometry of THz systems. Consequently, modulation technology is the focus of research in THz communication technology. Signal modulation refers to a process of using the modulation signal to control one or more parameters (amplitude, phase, etc.) of the carrier signal [29]. In recent years, various THz modulators based on different materials and structures [3032] have been reported to achieve large modulation depth, fast modulation speed, and wide modulation bandwidth [33]. Figure 2 shows a diagram of the elementary THz communication [9].

2.1. Optically Tuned THz Modulator

The earliest THz modulator is based on hybrid multiquantum well structure, which is optically tuned to realize THz modulation [34]. Optical modulation often used a laser as the excitation light source. The laser irradiates the substrate material to generate carriers which can affect the conductivity of the material. The change in conductivity changes the transmittance and reflectivity of the THz wave transmitting in the material, which realizes the modulation of THz wave [35, 36].

2.1.1. Modulator Based on Semiconductor Materials and Metamaterials

The semiconductor materials and metamaterials can artificially control the electromagnetic waves by designing the reasonable structure and size of unit cell [37]. In 2004, Tanaka et al. used 2D metal hole arrays (2D-MHAs) as a THz modulator [38]. Inspired by this work, many research groups began to use laser to modulate the THz wave. In THz wave region, the electric field response mechanism of conventional semiconductor materials can be explained by the Drude model [39] which treats free carriers in semiconductor materials as free electron gas. When laser irradiates on semiconductor materials, free carriers may be generated so long as the energy of the photon is greater than the bandgap of the semiconductor . The equivalent relative dielectric constant is given asThe plasma frequency is given aswhere is related to the propagation loss; is the electron plasma frequency; is the electron density; is the electron charge; is the effective mass of the electron.

For semiconductor materials at normal temperature, microwave or THz wave transmitting in the material will be strongly attenuated, and it cannot even propagate. For the ultraviolet or higher band of , materials are almost “transparent.” To obtain an electric field response in THz wave, it is necessary to lower the electron plasma frequency of materials. From the expression of plasma frequency, it is well known that the electron plasma frequency of materials can be varied by changing the effective mass and density of the electron. Therefore, using a laser with an energy greater than the forbidden bandwidth of materials can modulate the THz wave.

A THz modulator by exciting free electrons in a hybrid multiple-quantum-well structure was demonstrated by Libon et al. The electron density could reach 1011 cm−2 in a periodic quantum well structure. It realized a modulation depth of 40% in the range of 0.2-1 THz [34]. This was the first demonstration of optically tuned THz wave. In subsequent following research, semiconductor materials commonly used include high-resistance Si, high-resistance GaAs, and Si on sapphire. Meanwhile, combined with some structural design, such as photonic crystal, anisotropic medium, and surface plasma array, modulator could achieve better modulation effect. The modulator used in Li’s work was a high-resistance Si wafer [40]. Unfortunately, the modulation speed was only 0.2 kHz, given that the lifetime of carriers in ultra-high-resistivity Si wafer was long. On the contrary, the lifetime of carriers in GaAs is short. Fekete et al. reported a method of embedding a GaAs defect layer in alternately stacked SiO2 and MgO periodic structures to constitute a one-dimensional photonic crystal. The efficient modulation of the THz beam can be achieved even at low photocarrier concentrations by exciting the front GaAs surface via ultrashort 810 nm laser pulses [41].

Theoretically, the modulation speed of the THz wave can reach to GHz. The difficulty lies in the carrier lifetime of the semiconductor substrate material. Usually, high laser energy can also solve this problem. The pump laser dynamically modifies the plasma frequency of the localized surface plasmon, rather than changing conductivity. In 2013, Deng et al. experimentally demonstrated the modulation speed of 1.2 GHz on InSb gratings fabricated on semi-insulating GaAs substrate (Figure 3(1)). This provided more creative possibilities for optical tuning in future THz devices [42]. Modulation efficiency depends on the energy level of the material, the crystal arrangement of the organic molecules, and the transported carriers at the interface. Actually, the active modulators can implement near-perfect modulation efficiency for THz communication applications [43]. Yoo et al. used a hybrid dual-layer system consisting of molecular organic semiconductors and Si to implement optically controlled active THz modulator (Figure 3(2)). The 98% modulation efficiency was achieved due to the rapid light-induced electron transfer from Si to C60 layer, which is almost fully modulated. At present, some studies have shown that the deposition of organic film on Si can also achieve full modulation [45, 46]. Since nanomaterials have unique physical properties, semiconductor nanostructures become a research hotspot [47]. The modulator used in Shi’s work was a Si nanotip (SiNT) array (Figure 3(3)). The nanotip could be used as a THz wave antireflection layer to achieve low loss. This optically driven THz modulator with low loss and high modulation depth has the potential to be used in THz imaging [44].

The negative refractive index metamaterial is mainly realized by lattice of thin wires and open resonant rings. The unique electric field response of lattice of thin wires can achieve a negative dielectric constant; accordingly, the magnetic field response of the open resonant rings can achieve a negative magnetic permeability [48, 49]. Like the THz metamaterial modulator reported by Padilla, the modulator consists of a metal open resonant ring array structure on a GaAs substrate. When laser is illustrated on the GaAs substrate, photogenerated carriers affect opening capacitance with varying laser power. Thus, the transmission intensity of the THz wave would be modulated [50]. ‘‘Metasurfaces’’ are the two-dimensional version of metamaterials. Compared to three-dimensional bulk metamaterials, the thickness of the metasurfaces relative to the operating wavelength is negligible. They consume less physical space and have lower insertion loss. Longqing Cong et al. demonstrated an active hybrid metasurface integrated with patterned semiconductor inclusions for all-optical active control of terahertz waves [51]. It achieved ultrafast modulation of the polarization state. By properly incorporating silicon islands into the metamaterial unit cells, Xieyu Chen et al. presented a metasurface which can be optically controlled with a modulation depth reaching 68% and 62% for horizontal and vertical polarizations [52]. It opens up new avenues for the design of active metamaterials.

2.1.2. Modulator Based on 2D Materials

2D materials have unusual electrical and optical properties. In recent years, they attracted increasing attention for applications in optoelectronics. Graphene, the best-known 2D material, has been widely used for THz modulators tuned by light since being discovered in 2004 [53]. The carbon atom arrangement of graphene determines its unique conical band structure. The conductivity of graphene is contributed by the in-band transition of electrons and the transition between bands. In the THz range, the in-band transition of electrons plays a decisive factor due to the photon energy being small. Therefore, we can approximate the thin layer conductivity of graphene by the Drude model as [54] is the Drude weight, and it is given aswhere contributed to the acoustic phonon scattering; is the Fermi velocity; is the carrier concentration.

Thus, the thin layer conductivity of graphene is closely related to the Fermi level. In general, the concentration and type of carriers can be dynamically modulated by changing the Fermi level position of graphene. Figure 4(a) is the band structure of grapheme [55, 56]. When the Fermi level is in the conduction band, the main carrier is free electrons; when the Fermi level is in the valence band, the main carrier is a hole; when the Fermi level is at Dirac point, the carrier concentration is at a minimum and the conductivity of graphene is also very low.

Graphene has low insertion losses which is extremely ideal for optical modulation. Zhang Xiang’s team firstly demonstrated it. They proposed an optical modulator by regulating the Fermi level of graphene [57]. The most graphene modulators consist of graphene and semiconductor material to form heterojunction. Laser beam penetrates Si to produce a large number of carriers; meanwhile, photogenerated carriers diffuse into the graphene layer and change its conductivity, which results in an amount of THz wave absorption by graphene layer. The most classic work is light-modulating graphene devices formed with graphene on Si (GOS) demonstrated by Weis in 2012 (Figure 5(1)). This modulator was pumped by a 780 nm femtosecond laser. The graphene layer absorbed the modulated beam of approximately 2.3%. As excited with wavelength of 750 nm and power of 40 mW pumped laser, this modulator could realize the modulation about 68%. The tunable THz bandwidth was in the range of 0.2-2 THz. When the optical pump energy reached 500 mW (@750 nm), the transmission THz wave almost completely disappeared [58]. By replacing Si with Ge, an optical modulator of full modulation based on graphene was demonstrated (Figure 5(3)). A laser with a wavelength of 1550 nm could be used to pump effectively. The measurement results presented that the modulation frequency range, modulation depth, and modulation speed were 0.25-1 THz, 94%, and 200 kHz, respectively [59]. Although it achieved full modulation, it required a high-power laser. With development of 2D material fabrication, an efficient THz modulator with low power was demonstrated. It needs only an external 450 nm continuous wave laser. It is mainly coated with a high-quality monolayer graphene film on a Si substrate. With external light excitation, the proposed modulator could reach a modulation depth of 74%. Incidentally, its modulation depth can be further improved [60].

Monolayer transition metal dichalcogenides (TMDs, such as MoS2 and WS2) are direct-bandgap semiconductors offering properties complementary to graphene [89]. A great number of modulators based on monolayer TMDs have been reported. For example, a bidimensional material modulator (Figure 5(4)) based on MoS2 and Si improved modulation depth as high as 64.9% at 0.9 THz pumped with an 808 nm laser. The modulation can be much higher after annealing MoS2. Under a larger pump power of 4.56 W, this depth was about 96%. These results suggested that MoS2 is a promising material [62]. Later on, many studies have been reported for improvement in terms of cost, manufacturing process, pump power, response speed, and modulation depth. Liu et al. studied a highly efficient active THz wave modulator based on MoS2/Ge structure. Monolayers of MoS2 and graphene samples were grown on n-doped Ge substrates by chemical vapor deposition (CVD). The light control bandwidth was greatly widened to reach 2.6 THz [90]. In addition to the expansion of the modulation bandwidth, Fan et al. demonstrated a THz modulator (Figure 5(2)) based on p-type annealed tungsten disulfide (WS2) and high-resistivity Si (n-type) structure. This modulator presented a laser power-dependent modulation mechanism. Ranging from 0.25 to 2 THz, the modulation depth reached 99% when the pumping laser was 2.59 W/cm2 [61]. Other researchers have adopted new methods to realize similar modulators. The size and thickness of WS2 film are controlled by innovatively depositing liquid-released WS2 nanosheets on Si instead of CVD method (Figure 5(6)). With raising the pump power, the modulation depth continues to increase, eventually reaching 94.8% under 470mW [63].

2.1.3. Modulator Based on Flexible Substrate

Compared to rigid substrate THz modulators [91], flexible substrates have many advantages such as transparency, lightweight, low cost, and consistent adhesion [9, 92], which offer a new potential for THz modulator. For example, in 2006, D. Y. Khan et al. proposed a THz modulation on flexible substrates (Figure 6(1)). They made single-crystal Si with a thickness of 20 nm to 320 nm into a Si ribbon with a width of 5 μm to 50 μm and a length of 15 mm. When supported by a flexible substrate, this wavy Si ribbon could be reversibly stretched or compressed under high horizontal stress without damaging it. Considering the electrical properties of Si ribbon, its electrical parameters can be modified by changing the surface shape of the flexible substrate [64]. An optically tuned metamaterial modulator on a flexible polymer sheet, which had a frequency modulated in the THz range, was proposed by Liu et al. Electric split-ring resonators (eSRRs) are attached to a thin polyimide layer and assembled into the modulator (Figure 6(2)). The optical excitation of the GaAs patch changed the response of the metamaterial. The metamaterial effectively adjusted the effective dielectric constant. In their experiment, a modulation depth of 60% was achieved in the frequency range of 1.1-1.8 THz. This kind of flexible device can be more widely used and created on nonplanar structures for extensive applications in the future [65]. For current studies, high repeatability has not been obtained after multiple bending of the flexible substrate due to metal fatigue property [78, 93].

2.1.4. Summary

The modulation properties based on different materials are summarized in Table 2. The material dominates the modulation depth and speed of THz wave, rather than the light source. Graphene and other 2D materials can achieve close to 100% modulation depth with modulation speed reaching the order of MHz. On the other hand, more experimental works should be carried out to explore those modulators based on simulations. The modulation efficiency of optically tuned THz modulator based on flexible substrate has yet to be improved. Lower insertion loss and more compact integration will be the future direction of optically tuned THz modulator.

WorkDescriptionYearFrequencyModulation depthRef.

Libon et al.Multiple quantum well19990.2-1 THz40%[34]
Deng L. et al.InSb gratings20131.5 THz46.70%[42]
Peter W. et al.Graphene on Si (GOS)20120.2-2 THz99%[56]
Wen Q. Y. et alGraphene on Ge20140.25-1 THz94%[57]
Cao Y. et al.MoS220160.5- 1.5THz96%[62]
Fan Z.Y. et al.WS220170.25- 2 THz99%[61]
Hyung K. al.C6020140.5- 1.5THz98%[43]
He T. et al.AlClPc20150-2.5 THz99%[45]
Shi Z. et al.Si Nanotip20170.25-1 THz>90%[44]

2.2. Electrically Tuned THz Modulator

The other route for modulating THz wave is electrically tuned THz modulator. Using a mixed type-I/type-II GaAs/AlAs multiple-quantum-well sample, Libon et al. have demonstrated firstly an electrically controllable modulator in 2000 [94]. Electrical modulation is to control the concentration of electrons in the substrate materials or structures by applying bias voltage, which modulate the amplitude of the incident THz wave [94]. The transmission bandwidth and modulation depth and speed are limited by dielectric constant, loss, and response time of the materials. Consequently, to achieve high-speed band-pass modulation or broadband filter, it is necessary to find high-speed, low-loss THz functional materials and design novel structures.

Similar to the main idea of optically tuned THz modulator, charge injection can also modulate the THz wave. In the past decade, 2D electron gas (2DEG) in HEMTs has been demonstrated to modulate THz wave effectively. HEMT is a field effect transistor that provides a 2DEG quantum well at the heterojunction interface of a highly doped semiconductor (typically AlGaAs) and an original undoped semiconductor (GaAs). In 2000, Kersting presented a GaAs/AlGaAs heterostructure device which powered up the phase modulation of THz signals [94]. This modulator contained five parabolic quantum wells (PQWs). THz wave modulation can be realized by stimulating electrically low-energy electron to high-energy states. Figure 7(1)(b) shows the power spectrum of the differential modulation signal and the power spectrum of the incident pulse. It led to the development of THz electronics chip due to a reduction of the device dimensions. Nevertheless, it cannot operate at low temperatures. To allow THz modulator to be operated at room temperature, Kleine-Ostmann et al. presented room-temperature THz wave modulator by using a device based on a gated 2DEG [66]. This modulator mainly included a 2DEG whose density could be controlled by the gate voltage. This major breakthrough illustrated that 2DEG in semiconductors could be used to control THz wave effectively [95]. Similarly, it has also been used for THz emission [96], THz detection [97], etc. Other 2DEG systems can be also used to realize the modulation; for example, a THz modulator based on 2DEG of a GaN/AlGaN heterostructure was demonstrated by Zhou (Figure 7(3)). The modulator had a maximum intensity modulation depth of 93% and a 3dB operating bandwidth of 400 kHz. It required only a low driving voltage amplitude of 2V under 8.7 K. This active plasma-based THz modulator may provide a promising solution in THz technology fields for the metamaterial THz modulator [67].

2.2.1. Modulator Based on Semiconductors and Metamaterials

In addition, metamaterials are also a hot spot in THz modulator [98]. Kebin Fan et al. demonstrated a metamaterial active device which consists of gold split-ring resonators (SRRs) on GaAs thin film grown on Si substrate [8]. It has achieved 50% modulation depth and 100 kHz modulation speed. Schottky/n-doped GaAs devices had been developed to increase greatly the modulation speed. In further studies, the modulation speed had reached 10 MHz; however, the modulation depth of this modulator was only 30% [99]. The single-particle nonresonant absorption mechanism described in Drude model has been used in the related studies. As seen from experiments mentioned above, Drude model has not yet been effective enough for the theory of metamaterial modulator [100].

2.2.2. Modulator Based on Graphene

To further improve the modulation depth and modulation speed of THz modulator, different active medium as substrate has been tested. The refractive index of those materials can usually be written in the form of a complex refractive index: , where is the real part of the refractive index and the imaginary part of the refractive index. When the voltage is adjusted, the real and imaginary parts are usually changed at the same time. By using those changes, different electric modulators can be developed. For example, electroabsorption modulator is based on imaginary part changing. When the real part of the refractive index changed with applied voltage, the transmission phase of THz wave changed. Therefore, for the electroabsorption modulator based on 2D material, a better modulation effect can be obtained by changing the refractive index through applied voltage. In fact, electromodulators based on 2D materials mainly focused on graphene. Graphene has many particular properties, such as adjustable thin layer conductivity and long mean free path, due to its unique conical energy band structure [101103]. Its linear dispersion relationship between energy and crystal momentum makes graphene superior to other semiconductor materials.

S. Rodriguez utilized graphene to modulate THz wave (Figure 8(1)). The modulation depth and modulation speed could reach 15% and 20 kHz, respectively [68]. Meanwhile, the same research group presented a reflective THz modulator, as shown in Figure 8(2). The silver film on the back of the reflective THz modulator acted as both gate and mirror, which improved the modulation depth with 64% and expanded bandwidth ranging 0.57-0.63 THz compared to their early works. However, its insertion loss and modulation speed only reach 2 dB and 4 kHz, respectively [69]. The essence of those works is to change the Fermi level of graphene by adjusting applied voltage. The following graphene THz modulators with different structures are also based on this method. To improve modulation depth, multiple layers of graphene are a choice [102]. As shown in Figure 8(3), a THz electroabsorption modulator based on two-layer graphene with periodic micron-belt pattern was presented. The THz wave was vertically illustrated on the surface of graphene, which enhanced the absorption of light because of the plasma effect. This modulator could operate at frequencies up to tens of THz, and the modulation depth could even reach 100% [103].

Usually, the modulation depth of most modulators based on monolayer graphene can only reach 80% [69]. However, monolayer graphene combined with other structures or devices can improve the modulation depth. For example, G. Liang puts monolayer graphene on top of quantum cascade laser (QCL) to demonstrate modulation depth of 100% (Figure 9(1)) and modulation speed of 110 MHz [71]. The high modulation depth was a consequence of a strong interaction between the graphene and THz wave, whereas the high modulation speed can be improved by reducing the dimension of device. It has recently been demonstrated that a THz modulator can realize full modulation with a wide modulation bandwidth and fast modulation speed. Using monolayer graphene, Huang proposed an adjustable complementary ring resonator (Figure 9(2)). It was worth mentioning that in the range of 1-2 THz and 3-7 THz, three significant resonant peaks can be modulated. The maximum modulation depth reaches 98.8% at 7.47 THz [72].

2.2.3. Modulator Based on Flexible Substrate

Flexible substrate was used to fabricate optical modulator with many merits [104, 105] as described in Section 2.1.3. For electric modulator, flexible substrate plays also an important role. For example, Kocabas et al. presented a graphene metamaterial THz modulator based on a flexible substrate (Figure 10(1)), which consists of two large-area graphene electrodes transferred onto THz transparent substrates with ionic liquid electrolytes between them. The bias can change electrostatic doping of graphene, which affects its optical properties. In this case, the maximum modulation depth reaches only 50% at 0.1-1.4 THz working at a bias of 3V. The modulation speed was slow [73]. Virtually, this modulator showed excellent flexibility, which has not been deformed after being flexed many times. Modulator based on flexible substrate can also realize a high modulation depth. For example, E. Kaya et al. have demonstrated that polyvinyl chloride (PVC) and polyethylene (PE) were selected as flexible substrates (Figure 10(2)). A multilayer graphene modulator was fabricated on those flexible substrates by chemical vapor deposition. This device could fully modulate THz wave with a frequency range of 0.2-1.5 THz at a low voltage of 3.4V [74]. The comparison of electrically tuned modulation properties based on different substrate materials is shown in Table 3.

WorkDescriptionYearFrequencyModulation depthRef.

Huang Y. D.Plasmonic2016-93%[67]
Zhou G.VO220170.3-1.0THz>50%[100]
Sensale-R. B.Graphene201210THz100%[106]
Liang G.Graphene20153THz94%-100%[71]
Huang Z.Monolayer Graphene20181-7THz>85%[72]
Chikhi N.Liquid crystals20181-3THz>90%[107]
Kaya E.Flexible Substrate20180.2-1.5THz100%[74]

2.2.4. Summary

The modulation properties of different materials reported in literatures are given in Table 2. Graphene can achieve modulation depth close to 100% and the modulation speed in the order of kHz. At present, there are few reports on flexible THz modulators since organic functional materials and flexible substrates cannot fully be compatible with micronanofabrication processes. Based on reviewing the electric modulator, it implied that electric modulation device needs to miniaturize the structure, to low insertion loss, and to improve modulation speed, which will be the future direction.

2.3. Photoelectric Hybrid Tuned THz Modulator

Sections 2.1 and 2.2 described the modulation methods using electricity or light separately. If two methods can be combined together, better modulation effects may be obtained. The photoelectric hybrid modulation method is a method of synthesizing electric and optical modulation. Its basic principle is using pump light excited carriers in a base semiconductor material. In the meantime, the motion direction of the carrier is adjusted by an external bias [108]. For example, an optoelectric hybrid modulator was exhibited by Q. Li et al. [75]. Its structure was shown in Figure 12. Si substrate was pumped with a continuous laser of 532 nm to generate a large number of electron-hole pairs. Under the drive of the concentration difference, the photoelectrons in the Si diffused into the graphene until the equilibrium state was established. A structure similar to a PN junction was formed between the two materials. When the bias was varied from 0 V to -3 V, the peak modulation of the time-domain signal peak achieved 51% at optical pump power with 420 mW. When the bias changed from 0 V to -4 V, the modulation amplitude depth became 83%. Based on this structure, Ran Jiang et al. used a Si:HfO2 material added between graphene and Si substrate to realize a device that had a modulation effect under both biasing directions [76]. However, it is more difficult to implement a hybrid modulation method since there are completely different responses when applying positive or negative biases. Quan Li et al. realized an active modulation at low voltage (~1V) by a photoelectric hybrid modulator with a two-dimensional material on a structured Si substrate [77].

As a new modulation method, photoelectric hybrid tuned THz modulator has not drawn much attention. However, this extreme high sensitive method is in need urgently.

2.4. Mechanically Tuned THz Modulator

THz modulators on flexible substrates have been introduced in Sections 2.1.3 and 2.2.3. These devices can also be applied to complex nonplanar surfaces such as communications fibers, aircraft, and radar surfaces [75, 109]. Alternatively, the modulation of THz wave was achieved by preparing metal metastructures on the surface and changing space between them [110]. For example, in 2013, Li et al. presented a flexible and tunable THz metamaterial (Figure 11(1)). The tensile deformation of substrate caused change of the pitch, which in turn affected the transmission of THz waves. Thus, this THz device can be used to detect the deformation of different objects. When the deformation appeared multiple times, there were metal fatigue phenomena which affected the stability. This method can also achieve phase modulation. For example, an ultrathin THz wave phase shifter was described by Z.L. Han [79]. Each metamaterial unit consists of double-layered structure. The distance change between two layers affects phase shift which caused phase delay. This phase shifter has high transmission with a coefficient of 91%. Compared to traditional THz wave phase shifters, this ultrathin flexible phase shifter has better signal transmission or reflection (Figure 11(2)). It could be integrated with other systems to improve device adjustability. These findings paved the way for flexible THz electronics and contributed to the development of THz technology [111].

Nowadays, flexible electronic devices have gradually become a research hotspot with the development of wearable electronic devices, flexible displays, and health monitoring devices. One type of modulator affects the intensity variation of the THz wave by its self-deforming [112]. Unfortunately, there are no reports on THz modulation devices with high stability in the deformed state [113]. Therefore, studying a THz modulator with stable modulation performance under flexible deformation is a problem to be solved.

2.5. Thermally Tuned THz Modulator

In many transition metal oxides, the modulation of THz wave is achieved by external stimuli, including temperature, light, electric field, mechanical strain, or magnetic field [80, 114, 115]. Temperature changes can affect the mobility and lifetime of free carriers in those materials. Vanadium dioxide (VO2) film is a metal oxide with an insulator-metal phase transition property, which can be converted from insulating state (monoclinic structure) to metallic state (tetragonal structure) under heat [116, 117]. It leads to reversible mutation in physical properties [118, 119]. Both theory and experiment have exhibited that VO2 film has high transmittance in the insulating phase and opposite property in the metal phase [120]. Therefore, VO2 is a good thin film phase change material suitable for the THz modulator (Figure 13) which consists of periodic metastructure on the surface of VO2; then THz wave can be modulated by controlling the temperature [121].

2.6. Magnetically Tuned THz Modulator

Magnetic-tuned terahertz modulator was based on the magnetooptical effect under an external magnetic field. For example, magnetized plasma 2D photonic crystal THz wave modulator was presented by Wen (Figure 14(1)) [81]. The resonant frequency can be tuned with the insertion loss of 0.3 dB. The modulation speed was as high as 4 GHz. Thus, this modulator has the potential for THz wireless broadband communication system.

A THz wave modulator based on Fe3O4-nanoparticles was reported recently (Figure 14(2)) [82]. This modulator consists of a magnetic fluid and metamaterial structure. The modulator confirmed a 34% modulation depth. It is worth mentioning that metamaterials cause a 33 GHz frequency shift at low magnetic field. This modulator will have many potential applications in THz filtering, modulation, and sensing.

Although magnetically tuned THz has more applications, unfortunately, they are poorly controllable in the current study.

2.7. MEMS Tuned THz Modulator

Microelectromechanical systems (MEMS) are a high-tech frontier discipline in modern information technology [122124]. The continuous improvement of MEMS technology provides superiority for THz modulator. For example, H. Tao et al. [83] achieved modulation of the resonant intensity in the THz band (0.5 THz) based on thermal drive technology in 2009. Q. Bai [84] et al. demonstrated a planar semiconductor metamaterial device utilizing MEMS-based slow-light tunable effects, which could tune over a wide frequency range in the THz band. Ozbey and Aktas [85] presented THz metamaterial device that used magnetically driven resonant frequency (Figure 15(1)). Z. Han demonstrated a reconfigurable metamaterial structure fabricated by MEMS technique [125]. The resonant frequency can be tuned by using the voltage to control the height of the center metal ring (Figure 15(2)). The modulation range was relatively narrow, which could only achieve modulation between 0.45 THz and 0.65 THz [86]. According to the merit of MEMS technology, the MEMS tuned THz modulator with high modulation efficiency could achieve extensive applications in high-power field.

2.8. THz Modulator Based on Coding and Programmable Metamaterials

The unique electromagnetic properties of electromagnetic metamaterials result in rapid evolving. For example, in 2014, Giovampaola and Engheta proposed a method of constructing metamaterials through spatially mixed “digital metamaterial bits” [126]. This new concept metamaterial can be used in THz modulator. At the same year, Tie Jun Cui et al. proposed the concept of coded metamaterials [87]. They abandoned the traditional method of effective medium theory and designed the encoded metamaterials of 1-bit code sequences, which were used to flexibly modulate THz waves. As shown from Figure 16, the “0” and “1” elements represent the ideal magnetic and electrical conductors, respectively. The phase difference after reflection is 180°. According to the traditional phase-array-antenna theory, the scattering pattern on the metasurfaces under the coding sequence can be calculated to design different coding sequences. Take the coded metasurfaces composed of N×N square grids with dimension D as an example [87, 127].

where and are the elevation and azimuth angles, respectively, and is the pattern function of a lattice. That is to say, different encodings produce different modulation effects. When the normal incident wave illuminates the metasurfaces, two and four reflected beams are formed (Figure 16), which illustrate that metasurfaces can modulate the THz wave. A 2-bit random coding arrangement was used to obtain the expected low-scattering pattern, which achieved wide-band diffuse reflection of terahertz waves [88]. Shuo Liu et al. proposed the concept of anisotropically encoded metamaterials in 2016 [128]. Their function depends on the polarization direction of the incident wave. The beam splitter used in metasurface can separate the orthogonal polarization modulated terahertz signals, which can be used to increase the transmission rate in ultra-high-speed wireless communication in the future. Coding and programmable metamaterials, a new approach to study and design from the information perspective, provide us with great flexibility in controlling the radiation of the electromagnetic wave in both amplitude and phase [129]. The research results illustrate that programmable metamaterials are a possible route to implement more functional THz modulators in the future.

3. Conclusions and Outlook

We have extensively reviewed modulators operating in THz frequency range and summarized the principles, current status, and advantages and disadvantages of various methods.

At present, electrical and optical modulation THz devices have achieved exciting results in terms of modulation depth and modulation speed. Compared with electrical modulation, optical modulation has deeper modulation depth, faster modulation speed, and easier modulation method. Although the photoelectric hybrid modulation can be more flexible, the modulation method is obviously complicated. Other methods provide new attempts for THz modulation; however, the extension and simple implementation in the frequency range need further study. In terms of material selection, 2D materials and flexible substrates have become the focus of recent experimental research due to their huge advantages. Programmable metamaterials dynamically control the phase responses for each element. It can be considered as a possible route for the future realization of THz modulators with far more functionalities.

THz modulator research is a dynamic, fast-growing, and challenging field. An ideal modulation device needs a higher degree of miniaturization, lower insertion loss, and higher modulation speed, which will be the core of building a THz communication system. More explorations are required for various actual devices to get an excellent modulation effect.

Conflicts of Interest

The authors declare that there are no conflicts of interest regarding the publication of this article.

Authors’ Contributions

Zhaoxin Geng conceived and outlined structure of this review. Zhaoxin Geng, Jian Liu, and Hongda Chen revised the manuscript. Zhengtai Ma wrote the manuscript. Zhiyuan Fan helped to revise the figures.


The work was financially supported by The National Key R. & D. Plan of China (2016YFB0402700, 2017YFB0405400), The National Natural Science Foundation of China (61774175, 61674146, and 61875140), The National Natural Science Foundation of China (Key Program: 61634006), The Opened Fund of the State Key Laboratory of Integrated Optoelectronics (No. IOSKL2017KF12) and the Key Program of Natural Science Foundation of Beijing (4181001), The Leading Project of Youth Academic Team @ Minzu University of China (Sensor and Microsystem: 317201929), and Young and Middle-Aged Talents Training Program of State Ethnic Affairs Commission.


  1. J. W. Fleming, “High-resolution submillimeter-wave fourier-transform spectrometry of gases,” IEEE Transactions on Microwave Theory and Techniques, vol. 22, no. 12, pp. 1023–1025, 1974. View at: Publisher Site | Google Scholar
  2. I. S. Osborne, “Applied physics: filling the THz gap,” Science, vol. 320, no. 5881, pp. 1262b–1262b, 2008. View at: Publisher Site | Google Scholar
  3. G. P. Williams, “Filling the THz gap - high power sources and applications,” Reports on Progress in Physics, vol. 69, no. 2, pp. 301–326, 2006. View at: Publisher Site | Google Scholar
  4. D. E. Spence, P. N. Kean, and W. Sibbett, “60-fsec pulse generation from a self-mode-locked Ti:sapphire laser,” Optics Expresss, vol. 16, no. 1, pp. 42–44, 1991. View at: Publisher Site | Google Scholar
  5. P. H. Siegel, “Terahertz technology,” IEEE Transactions on Microwave Theory and Techniques, vol. 50, no. 3, pp. 910–928, 2002. View at: Publisher Site | Google Scholar
  6. M. Tonouchi, “Cutting-edge terahertz technology,” Nature Photonics, vol. 1, no. 2, pp. 97–105, 2007. View at: Publisher Site | Google Scholar
  7. M. Nagel, P. Haring Bolivar, M. Brucherseifer, H. Kurz, A. Bosserhoff, and R. Büttner, “Integrated THz technology for label-free genetic diagnostics,” Applied Physics Letters, vol. 80, no. 1, pp. 154–156, 2002. View at: Publisher Site | Google Scholar
  8. H.-T. Chen, W. J. Padilla, J. M. O. Zide, A. C. Gossard, A. J. Taylor, and R. D. Averitt, “Active terahertz metamaterial devices,” Nature, vol. 444, no. 7119, pp. 597–600, 2006. View at: Publisher Site | Google Scholar
  9. T. Kleine-Ostmann and T. Nagatsuma, “A review on terahertz communications research,” Journal of Infrared, Millimeter, and Terahertz Waves, vol. 32, no. 2, pp. 143–171, 2011. View at: Publisher Site | Google Scholar
  10. J. Federici and L. Moeller, “Review of terahertz and subterahertz wireless communications,” Journal of Applied Physics, vol. 107, no. 11, article 111101, 2010. View at: Google Scholar
  11. H.-J. Song and T. Nagatsuma, “Present and future of terahertz communications,” IEEE Transactions on Terahertz Science and Technology, vol. 1, no. 1, pp. 256–263, 2011. View at: Publisher Site | Google Scholar
  12. H. Hoshina, S. Nakajima, M. Yamashita, C. Otani, and N. Miyoshi, “Terahertz imaging diagnostics of the cancer tissues with chemometrics technique,” Applied Physics Letters, vol. 90, no. 4, 2006. View at: Publisher Site | Google Scholar
  13. P. H. Siegel, “Terahertz technology in biology and medicine,” IEEE Transactions on Microwave Theory and Techniques, vol. 52, no. 10, pp. 2438–2447, 2004. View at: Publisher Site | Google Scholar
  14. B. Ferguson, S. Wang, D. Gray, D. Abbott, and X.-C. Zhang, “Identification of biological tissue using chirped probe THz imaging,” Microelectronics Journal, vol. 33, no. 12, pp. 1043–1051, 2002. View at: Publisher Site | Google Scholar
  15. H.-B. Liu, H. Zhong, N. Karpowicz, Y. Chen, and X.-C. Zhang, “Terahertz spectroscopy and imaging for defense and security applications,” Proceedings of the IEEE, vol. 95, no. 8, pp. 1514–1527, 2007. View at: Publisher Site | Google Scholar
  16. D. Zimdars, “Fiber-pigtailed terahertz time domain spectroscopy instrumentation for package inspection and security imaging,” in Proceedings of the Terahertz for Military and Security Applications, pp. 108–116, USA, April 2003. View at: Google Scholar
  17. J. Li, R. Yu, X. Hao, A. Zheng, and X. Yang, “Coherent laser-induced optical behaviors in three-coupled-quantum wells and their application to terahertz signal detection,” Optics Communications, vol. 282, no. 22, pp. 4384–4389, 2009. View at: Publisher Site | Google Scholar
  18. F. Rutz, M. Koch, S. Khare, M. Moneke, H. Richter, and U. Ewert, “Terahertz quality control of polymeric products,” International Journal of Infrared and Millimeter Waves, vol. 27, no. 4, pp. 547–556, 2006. View at: Publisher Site | Google Scholar
  19. S. Nishizawa, Y. Suzuki, T. Iwamoto, M. W. Takeda, and M. Tani, “Terahertz time-domain spectroscopy (THz-TDS) approach to the quality control on pharmaceutical products,” in Proceedings of the 35th International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2010, Italy, September 2010. View at: Google Scholar
  20. T. Crowe, “Multiplier technology for terahertz applications,” in Proceedings of the IEEE Sixth International Conference, pp. 58–61, 1998. View at: Google Scholar
  21. M. J. Fitch and R. Osiander, “Terahertz waves for communications and sensing,” Johns Hopkins APL Technical Digest, vol. 25, no. 4, pp. 348–355, 2004. View at: Google Scholar
  22. S. Jine, R. Jian, and L. Wenxin, “Progress of terahertz in communication technology,” Infrared and Laser Engineering, vol. 35, no. 3, pp. 342–347, 2006. View at: Google Scholar
  23. T. Kosugi, M. Tokumitsu, T. Enoki, M. Muraguchi, A. Hirata, and T. Nagatsuma, “120-GHz Tx/Rx chipset for 10-Gbit/s wireless applications using 0.1 μm-gate InP HEMTs,” in Proceedings of the IEEE Compound Semiconductor Integrated Circuit Symposium; 2004 IEEE CSIC Symposium, pp. 171–174, USA, October 2004. View at: Google Scholar
  24. A. Hirata, T. Kosugi, H. Takahashi et al., “120-GHz-band millimeter-wave photonic wireless link for 10-Gb/s data transmission,” IEEE Transactions on Microwave Theory and Techniques, vol. 54, no. 5, pp. 1937–1942, 2006. View at: Publisher Site | Google Scholar
  25. R. Yamaguchi, A. Hirata, T. Kosugi et al., “10-Gbit/s MMIC wireless link exceeding 800 meters,” in Proceedings of the 2008 IEEE Radio and Wireless Symposium, RWS, pp. 695–698, USA, January 2008. View at: Google Scholar
  26. T. Nagatsuma and A. Hirata, “10-Gbit/s wireless link technology using the 120-GHz band,” NTT Technical Review, vol. 2, no. 11, pp. 58–62, 2004. View at: Google Scholar
  27. S. Cherry, “Edholm’s law of bandwidth,” IEEE Spectrum, vol. 41, no. 7, pp. 58–60, 2003. View at: Publisher Site | Google Scholar
  28. J. Yao, N. Chi, P. Yang et al., “Study and outlook of terahertz communication technology,” Chinese Journal of Lasers, vol. 36, no. 9, pp. 2213–2233, 2009. View at: Publisher Site | Google Scholar
  29. J. Zhou, D. R. Chowdhury, R. Zhao et al., “Terahertz chiral metamaterials with giant and dynamically tunable optical activity,” Physical Review B: Condensed Matter and Materials Physics, vol. 86, no. 3, Article ID 035448, 2012. View at: Publisher Site | Google Scholar
  30. D. K. Kim and D. S. Citrin, “Frequency and amplitude modulation in terahertz-sideband generation in quantum wells,” Applied Physics Letters, vol. 94, no. 2, Article ID 021105, 2009. View at: Google Scholar
  31. J. Li, “Terahertz modulator using photonic crystals,” Optics Communications, vol. 269, no. 1, pp. 98–101, 2007. View at: Publisher Site | Google Scholar
  32. O. Paul, C. Imhof, B. Lägel et al., “Polarization-independent active metamaterial for high-frequency terahertz modulation,” Optics Express, vol. 17, no. 2, pp. 819–827, 2009. View at: Publisher Site | Google Scholar
  33. N. Necker, I. Libon, M. Hempel, J. Feldmann, M. Koch, and P. Dawson, “An optically-driven THz-modulator,” in Proceedings of the Technical Digest. Summaries of papers presented at the Conference on Lasers and Electro-Optics. Postconference Edition. CLEO '99. Conference on Lasers and Electro-Optics, pp. 370-371, Baltimore, Md, USA, 1999. View at: Publisher Site | Google Scholar
  34. I. H. Libon, S. Baumgärtner, M. Hempel et al., “An optically controllable terahertz filter,” Applied Physics Letters, vol. 76, no. 20, pp. 2821–2823, 2000. View at: Publisher Site | Google Scholar
  35. Z. Xie, X. Wang, J. Ye et al., “Spatial Terahertz Modulator,” Scientific Reports, vol. 3, no. 1, article 3347, 2013. View at: Publisher Site | Google Scholar
  36. W. L. Chan, H. Chen, A. J. Taylor, I. Brener, M. J. Cich, and D. M. Mittleman, “A spatial light modulator for terahertz beams,” Applied Physics Letters, vol. 94, no. 21, Article ID 213511, 2009. View at: Publisher Site | Google Scholar
  37. R. A. Shelby, D. R. Smith, and S. Schultz, “Experimental verification of a negative index of refraction,” Science, vol. 292, no. 5514, pp. 77–79, 2001. View at: Publisher Site | Google Scholar
  38. M. Tanaka, F. Miyamaru, M. Hangyo, T. Tanaka, M. Akazawa, and E. Sano, “Effect of a thin dielectric layer on terahertz transmission characteristics for metal hole arrays,” Optics Expresss, vol. 30, no. 10, pp. 1210–1212, 2005. View at: Publisher Site | Google Scholar
  39. R. Ulbricht, E. Hendry, J. Shan, T. F. Heinz, and M. Bonn, “Carrier dynamics in semiconductors studied with time-resolved terahertz spectroscopy,” Reviews of Modern Physics, vol. 83, no. 2, pp. 543–586, 2011. View at: Publisher Site | Google Scholar
  40. J.-S. Li and J.-Q. Yao, “Novel optical controllable terahertz wave switch,” Optics Communications, vol. 281, no. 23, pp. 5697–5700, 2008. View at: Publisher Site | Google Scholar
  41. L. Fekete, F. Kadlec, P. Kužel, and H. Němec, “Ultrafast opto-terahertz photonic crystal modulator,” Optics Expresss, vol. 32, no. 6, pp. 680–682, 2007. View at: Publisher Site | Google Scholar
  42. L. Deng, J. Teng, H. Liu et al., “Direct optical tuning of the terahertz plasmonic response of insb subwavelength gratings,” Advanced Optical Materials, vol. 1, no. 2, pp. 128–132, 2013. View at: Publisher Site | Google Scholar
  43. H. K. Yoo, Y. Yoon, K. Lee et al., “Highly efficient terahertz wave modulators by photo-excitation of organics/silicon bilayers,” Applied Physics Letters, vol. 105, no. 1, Article ID 011115, 2014. View at: Publisher Site | Google Scholar
  44. Z. Shi, X. Cao, Q. Wen et al., “Terahertz modulators based on silicon nanotip array,” Advanced Optical Materials, vol. 6, no. 2, Article ID 1700620, 2018. View at: Publisher Site | Google Scholar
  45. T. He, B. Zhang, and J. Shen, “High-efficiency THz modulator based on phthalocyanine-compound organic films’,” Applied Physics Letters, vol. 106, no. 5, 2015. View at: Google Scholar
  46. H. K. Yoo, H. Lee, K. Lee et al., “Conditions for optimal efficiency of PCBM-based terahertz modulators,” AIP Advances, vol. 7, no. 10, Article ID 105008, 2017. View at: Publisher Site | Google Scholar
  47. L. Jiu-Sheng, L. Shao-He, and Z. Le, “Terahertz modulator using 4-N, N-dimethylamino-4′-N′-methyl-stilbazolium tosylate (DAST)/Si hybrid structure,” IEEE Photonics Journal, vol. 10, no. 2, pp. 1–6, 2018. View at: Google Scholar
  48. J. B. Prendry, A. J. Holden, W. J. Stewart, and I. Youngs, “Extremely low frequency plasmons in metallic mesostructures,” Physical Review Letters, vol. 76, no. 25, pp. 4773–4776, 1996. View at: Publisher Site | Google Scholar
  49. J. B. Pendry, A. J. Holden, D. J. Robbins, and W. J. Stewart, “Magnetism from conductors and enhanced nonlinear phenomena,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 11, pp. 2075–2084, 1999. View at: Publisher Site | Google Scholar
  50. W. J. Padilla, A. J. Taylor, C. Highstrete, M. Lee, and R. D. Averitt, “Dynamical electric and magnetic metamaterial response at terahertz frequencies,” Physical Review Letters, vol. 96, no. 10, 2006. View at: Publisher Site | Google Scholar
  51. L. Cong, Y. K. Srivastava, H. Zhang, X. Zhang, J. Han, and R. Singh, “All-optical active THz metasurfaces for ultrafast polarization switching and dynamic beam splitting,” Light: Science & Applications, vol. 7, no. 1, 2018. View at: Publisher Site | Google Scholar
  52. X. Chen, S. Ghosh, Q. Xu et al., “Active control of polarization-dependent near-field coupling in hybrid metasurfaces,” Applied Physics Letters, vol. 113, no. 6, Article ID 061111, 2018. View at: Publisher Site | Google Scholar
  53. K. S. Novoselov, A. K. Geim, S. V. Morozov et al., “Electric field in atomically thin carbon films,” Science, vol. 306, no. 5696, pp. 666–669, 2004. View at: Publisher Site | Google Scholar
  54. P.-Y. Chen and A. Alu, “Terahertz metamaterial devices based on graphene nanostructures,” IEEE Transactions on Terahertz Science and Technology, vol. 3, no. 6, pp. 748–756, 2013. View at: Publisher Site | Google Scholar
  55. P. R. Wallace, “The band theory of graphite,” Physical Review A: Atomic, Molecular and Optical Physics, vol. 71, no. 9, pp. 622–634, 1947. View at: Publisher Site | Google Scholar
  56. J. C. Slonczewski and P. R. Weiss, “Band structure of graphite,” Physical Review A: Atomic, Molecular and Optical Physics, vol. 109, no. 2, pp. 272–279, 1958. View at: Publisher Site | Google Scholar
  57. M. Liu, X. Yin, E. Ulin-Avila et al., “A graphene-based broadband optical modulator,” Nature, vol. 474, no. 7349, pp. 64–67, 2011. View at: Publisher Site | Google Scholar
  58. P. Weis, J. L. Garcia-Pomar, M. Höh, B. Reinhard, A. Brodyanski, and M. Rahm, “Spectrally wide-band terahertz wave modulator based on optically tuned graphene,” ACS Nano, vol. 6, no. 10, pp. 9118–9124, 2012. View at: Publisher Site | Google Scholar
  59. Q. Wen, W. Tian, Q. Mao et al., “Graphene based all-optical spatial terahertz modulator,” Scientific Reports, vol. 4, no. 1, article 7409, 2015. View at: Publisher Site | Google Scholar
  60. M. Fu, X Wang, S. Wang et al., “Efficient terahertz modulator based on photoexcited graphene,” Optical Materials, vol. 66, pp. 381–385, 2017. View at: Google Scholar
  61. Z. Fan, Z. Geng, X. Lv et al., “Optical controlled terahertz modulator based on tungsten disulfide nanosheet,” Scientific Reports, vol. 7, no. 1, 2017. View at: Publisher Site | Google Scholar
  62. Y. Cao, S. Gan, Z. Geng et al., “Optically tuned terahertz modulator based on annealed multilayer MoS2,” Scientific Reports, vol. 6, no. 1, Article ID 22899, 2016. View at: Publisher Site | Google Scholar
  63. D.-S. Yang, T. Jiang, and X.-A. Cheng, “Optically controlled terahertz modulator by liquid-exfoliated multilayer WS2 nanosheets,” Optics Express, vol. 25, no. 14, pp. 16364–16377, 2017. View at: Publisher Site | Google Scholar
  64. D.-Y. Khang, H. Jiang, Y. Huang, and J. A. Rogers, “A stretchable form of single-crystal silicon for high-performance electronics on rubber substrates,” Science, vol. 311, no. 5758, pp. 208–212, 2006. View at: Publisher Site | Google Scholar
  65. K. Fan, X. Zhao, J. Zhang et al., “Optically tunable terahertz metamaterials on highly flexible substrates,” IEEE Transactions on Terahertz Science and Technology, vol. 3, no. 6, pp. 702–708, 2013. View at: Publisher Site | Google Scholar
  66. T. Kleine-Ostmann, P. Dawson, K. Pierz, G. Hein, and M. Koch, “Room-temperature operation of an electrically driven terahertz modulator,” Applied Physics Letters, vol. 84, no. 18, pp. 3555–3557, 2004. View at: Publisher Site | Google Scholar
  67. Y. D. Huang, Y. Yu, H. Qin et al., “Plasmonic terahertz modulator based on a grating-coupled two-dimensional electron system,” Applied Physics Letters, vol. 109, no. 20, Article ID 201110, 2016. View at: Google Scholar
  68. B. Sensale-Rodriguez, R. Yan, M. M. Kelly et al., “Broadband graphene terahertz modulators enabled by intraband transitions,” Nature Communications, vol. 3, article 780, 2012. View at: Google Scholar
  69. B. Sensale-Rodriguez, R. Yan, S. Rafique et al., “Extraordinary control of terahertz beam reflectance in graphene electro-absorption modulators,” Nano Letters, vol. 12, no. 9, pp. 4518–4522, 2012. View at: Publisher Site | Google Scholar
  70. B. Sensale-Rodriguez, R. Yan, M. Zhu, D. Jena, L. Liu, and H. Grace Xing, “Efficient terahertz electro-absorption modulation employing graphene plasmonic structures,” Applied Physics Letters, vol. 101, no. 26, Article ID 261115, 2012. View at: Publisher Site | Google Scholar
  71. G. Liang, X. Hu, X. Yu et al., “Integrated terahertz graphene modulator with 100% modulation depth,” ACS Photonics, vol. 2, no. 11, pp. 1559–1566, 2015. View at: Publisher Site | Google Scholar
  72. Z. Huang, Q. Han, C. Ji, J. Wang, and Y. Jiang, “Broadband terahertz modulator based on graphene metamaterials,” AIP Advances, vol. 8, no. 3, Article ID 035304, 2018. View at: Publisher Site | Google Scholar
  73. N. Kakenov, O. Balci, E. O. Polat, H. Altan, and C. Kocabas, “Broadband terahertz modulators using self-gated graphene capacitors,” Journal of the Optical Society of America B: Optical Physics, vol. 32, no. 9, pp. 1861–1866, 2015. View at: Publisher Site | Google Scholar
  74. E. Kaya, N. Kakenov, H. Altan, C. Kocabas, and O. Esenturk, “Multilayer graphene broadband terahertz modulators with flexible substrate,” Journal of Infrared, Millimeter, and Terahertz Waves, vol. 39, no. 5, pp. 483–491, 2018. View at: Publisher Site | Google Scholar
  75. Q. Li, Z. Tian, X. Zhang et al., “Active graphene–silicon hybrid diode for terahertz waves,” Nature Communications, vol. 6, no. 1, article 7082, 2015. View at: Google Scholar
  76. R. Jiang, Z. Han, W. Sun, X. Du, Z. Wu, and H. Jung, “Ferroelectric modulation of terahertz waves with graphene/ultrathin-Si:HfO2/Si structures,” Applied Physics Letters, vol. 107, no. 15, Article ID 151105, 2015. View at: Google Scholar
  77. Q. Li, Z. Tian, X. Zhang et al., “Dual control of active graphene-silicon hybrid metamaterial devices,” Carbon, vol. 90, pp. 146–153, 2015. View at: Publisher Site | Google Scholar
  78. J. Li, C. M. Shah, W. Withayachumnankul et al., “Mechanically tunable terahertz metamaterials,” Applied Physics Letters, vol. 102, no. 12, Article ID 121101, 2013. View at: Publisher Site | Google Scholar
  79. Z. Han, S. Ohno, Y. Tokizane et al., “Thin terahertz-wave phase shifter by flexible film metamaterial with high transmission,” Optics Express, vol. 25, no. 25, pp. 31186–31196, 2017. View at: Publisher Site | Google Scholar
  80. M. Liu, H. Y. Hwang, H. Tao et al., “Terahertz-field-induced insulator-to-metal transition in vanadium dioxide metamaterial,” Nature, vol. 487, no. 7407, pp. 345–348, 2012. View at: Publisher Site | Google Scholar
  81. W. Zhou, H.-M. Chen, K. Ji, and Y. Zhuang, “Vertically magnetic-controlled THz modulator based on 2-D magnetized plasma photonic crystal,” Photonics and Nanostructures - Fundamentals and Applications, vol. 23, pp. 28–35, 2017. View at: Publisher Site | Google Scholar
  82. X. Liu, L. Xiong, X. Yu, S. He, B. Zhang, and J. Shen, “Magnetically controlled terahertz modulator based on Fe3O4 nanoparticle ferrofluids,” Journal of Physics D: Applied Physics, vol. 51, no. 10, Article ID 105003, 2018. View at: Publisher Site | Google Scholar
  83. H. Tao, A. C. Strikwerda, K. Fan, W. J. Padilla, X. Zhang, and R. D. Averitt, “Reconfigurable terahertz metamaterials,” Physical Review Letters, vol. 103, no. 14, 2009. View at: Google Scholar
  84. J. Chen, “Tunable slow light in semiconductor metamaterial in a broad terahertz regime,” Journal of Applied Physics, vol. 107, no. 9, Article ID 093104, 2010. View at: Google Scholar
  85. B. Ozbey and O. Aktas, “Continuously tunable terahertz metamaterial employing magnetically actuated cantilevers,” Optics Express, vol. 19, no. 7, pp. 5741–5752, 2011. View at: Publisher Site | Google Scholar
  86. Z. Han, K. Kohno, H. Fujita, K. Hirakawa, and H. Toshiyoshi, “Tunable terahertz filter and modulator based on electrostatic MEMS reconfigurable SRR array,” IEEE Journal of Selected Topics in Quantum Electronics, vol. 21, no. 4, pp. 114–122, 2015. View at: Publisher Site | Google Scholar
  87. T. J. Cui, M. Q. Qi, X. Wan, J. Zhao, and Q. Cheng, “Coding metamaterials, digital metamaterials and programmable metamaterials,” Light: Science & Applications, vol. 3, no. 10, pp. e218–e218, 2014. View at: Publisher Site | Google Scholar
  88. L. Gao, Q. Cheng, J. Yang et al., “Broadband diffusion of terahertz waves by multi-bit coding metasurfaces,” Light: Science & Applications, vol. 4, no. 9, pp. e324–e324, 2015. View at: Publisher Site | Google Scholar
  89. K. F. Mak, C. Lee, J. Hone, J. Shan, and T. F. Heinz, “Atomically thin MoS2: a new direct-gap semiconductor,” Physical Review Letters, vol. 105, no. 13, 2010. View at: Google Scholar
  90. X. Liu, B. Zhang, G. Wang, W. Wang, H. Ji, and J. Shen, “Active terahertz wave modulator based on molybdenum disulfide,” Optical Materials, vol. 73, pp. 718–722, 2017. View at: Publisher Site | Google Scholar
  91. Y. J. Yoo, H. Y. Zheng, Y. J. Kim et al., “Flexible and elastic metamaterial absorber for low frequency, based on small-size unit cell,” Applied Physics Letters, vol. 105, no. 4, Article ID 041902, 2014. View at: Publisher Site | Google Scholar
  92. N. R. Han, Z. C. Chen, C. S. Lim, B. Ng, and M. H. Hon, “Broadband multi-layer terahertz metamaterials fabrication and characterization on flexible substrates,” Optics Express, vol. 19, no. 8, pp. 6990–6998, 2011. View at: Publisher Site | Google Scholar
  93. S. Lee, S. Kim, T. Kim et al., “Metamaterials: reversibly stretchable and tunable terahertz metamaterials with wrinkled layouts,” Advanced Materials, vol. 24, no. 26, pp. 3438–3438, 2012. View at: Publisher Site | Google Scholar
  94. R. Kersting, G. Strasser, and K. Unterrainer, “Terahertz phase modulator,” IEEE Electronics Letters, vol. 36, no. 13, pp. 1156–1158, 2000. View at: Publisher Site | Google Scholar
  95. S. Rout, D. Shrekenhamer, S. Sonkusale, and W. Padilla, “Embedded HEMT/metamaterial composite devices for active terahertz modulation,” in Proceedings of the 23rd Annual Meeting of the IEEE, pp. 437-438, 2010. View at: Google Scholar
  96. J. Mateos, S. Pérez, D. Pardo et al., “Terahertz emission and noise spectra in HEMTs,” in Proceedings of the AIP Conference, vol. 800, pp. 423–430, 2005. View at: Google Scholar
  97. T. Watanabe, S. B. Tombet, Y. Tanimoto et al., “Ultrahigh sensitive plasmonic terahertz detector based on an asymmetric dual-grating gate HEMT structure,” Solid-State Electronics, vol. 78, pp. 109–114, 2012. View at: Publisher Site | Google Scholar
  98. H.-T. Chen, W. J. Padilla, M. J. Cich, A. K. Azad, R. D. Averitt, and A. J. Taylor, “A metamaterial solid-state terahertz phase modulator,” Nature Photonics, vol. 3, no. 3, pp. 148–151, 2009. View at: Publisher Site | Google Scholar
  99. D. Shrekenhamer, S. Rout, A. C. Strikwerda et al., “High speed terahertz modulation from metamaterials with embedded high electron mobility transistors,” Optics Express, vol. 19, no. 10, pp. 9968–9975, 2011. View at: Publisher Site | Google Scholar
  100. G. Zhou, P. Dai, J. Wu et al., “Broadband and high modulation-depth THz modulator using low bias controlled VO2-integrated metasurface,” Optics Express, vol. 25, no. 15, pp. 17322–17328, 2017. View at: Publisher Site | Google Scholar
  101. K. F. Mak, M. Y. Sfeir, Y. Wu, C. H. Lui, J. A. Misewich, and T. F. Heinz, “Measurement of the optical conductivity of graphene,” Physical Review Letters, vol. 101, no. 19, Article ID 196405, 2008. View at: Publisher Site | Google Scholar
  102. Y. Zhang, Y.-W. Tan, H. L. Stormer, and P. Kim, “Experimental observation of the quantum Hall effect and Berry's phase in graphene,” Nature, vol. 438, no. 7065, pp. 201–204, 2005. View at: Publisher Site | Google Scholar
  103. A. K. Geim, “Graphene: status and prospects,” Science, vol. 324, no. 5934, pp. 1530–1534, 2009. View at: Publisher Site | Google Scholar
  104. P. D. Cunningham, N. N. Valdes, F. A. Vallejo et al., “Broadband terahertz characterization of the refractive index and absorption of some important polymeric and organic electro-optic materials,” Journal of Applied Physics, vol. 109, no. 4, Article ID 043505, 2011. View at: Google Scholar
  105. Y. G. Rabobason, G. P. Rigas, S. Swaisaenyakorn et al., “Design of flexible passive antenna array on kapton substrate,” Progress in Electromagnetics Research C, vol. 63, pp. 105–117, 2016. View at: Publisher Site | Google Scholar
  106. Y. Wu, C. La-O-Vorakiat, X. Qiu et al., “Graphene terahertz modulators by ionic liquid gating,” Advanced Materials, vol. 27, no. 11, pp. 1874–1879, 2015. View at: Publisher Site | Google Scholar
  107. N. Chikhi, M. Lisitskiy, G. Papari, V. Tkachenko, and A. Andreone, “A hybrid tunable THz metadevice using a high birefringence liquid crystal,” Scientific Reports, vol. 6, no. 1, 2016. View at: Google Scholar
  108. I. Maeng, S. Lim, S. J. Chae, Y. H. Lee, H. Choi, and J.-H. Son, “Gate-controlled nonlinear conductivity of Dirac fermion in graphene field-effect transistors measured by terahertz time-domain spectroscopy,” Nano Letters, vol. 12, no. 2, pp. 551–555, 2012. View at: Publisher Site | Google Scholar
  109. J. Li, C. M. Shah, W. Withayachumnankul et al., “Flexible terahertz metamaterials for dual-axis strain sensing,” Optics Expresss, vol. 38, no. 12, pp. 2104–2106, 2013. View at: Publisher Site | Google Scholar
  110. Z.-G. Wang, Y.-F. Chen, P.-J. Li et al., “Flexible graphene-based electroluminescent devices,” ACS Nano, vol. 5, no. 9, pp. 7149–7154, 2011. View at: Publisher Site | Google Scholar
  111. L. Zhang, M. Zhang, and H. Liang, “Realization of full control of a terahertz wave using flexible metasurfaces,” Advanced Optical Materials, vol. 5, no. 24, Article ID 1700486, 2017. View at: Google Scholar
  112. S. Aksu, M. Huang, A. Artar et al., “Flexible plasmonics on unconventional and nonplanar substrates,” Advanced Materials, vol. 23, no. 38, pp. 4422–4430, 2011. View at: Publisher Site | Google Scholar
  113. J. Liu, P. Li, Y. Chen et al., “Flexible terahertz modulator based on coplanar-gate graphene field-effect transistor structure,” Optics Letters, vol. 41, no. 4, article 816, 2016. View at: Google Scholar
  114. P. Limelette, A. Georges, D. Jérome, P. Wzietek, P. Metcalf, and J. M. Honig, “Universality and critical behavior at the Mott transition,” Science, vol. 302, no. 5642, pp. 89–92, 2003. View at: Publisher Site | Google Scholar
  115. J. Wang, J. B. Neaton, H. Zheng et al., “Epitaxial BiFeO3 multiferroic thin film heterostructures,” Science, vol. 299, no. 5613, pp. 1719–1722, 2003. View at: Publisher Site | Google Scholar
  116. A. Zylbersztejn and N. F. Mott, “Metal-insulator transition in vanadium dioxide,” Physical Review B: Condensed Matter and Materials Physics, vol. 11, no. 11, pp. 4383–4395, 1975. View at: Publisher Site | Google Scholar
  117. E. E. Chain, “Optical properties of vanadium dioxide and vanadium pentoxide thin films,” Applied Optics, vol. 30, no. 19, pp. 2782–2787, 1991. View at: Publisher Site | Google Scholar
  118. H. Kim, Y. W. Lee, B. Kim et al., “Monoclinic and correlated metal phase in VO 2 as evidence of the mott transition: coherent phonon analysis,” Physical Review Letters, vol. 97, no. 26, 2006. View at: Publisher Site | Google Scholar
  119. R. Lopez, L. A. Boatner, T. E. Haynes, R. F. Haglund Jr., and L. C. Feldman, “Switchable reflectivity on silicon from a composite VO2-SiO2 protecting layer,” Applied Physics Letters, vol. 85, no. 8, pp. 1410–1412, 2004. View at: Publisher Site | Google Scholar
  120. T. Ben-Messaoud, G. Landry, J. P. Gariépy, B. Ramamoorthy, P. V. Ashrit, and A. Haché, “High contrast optical switching in vanadium dioxide thin films,” Optics Communications, vol. 281, no. 24, pp. 6024–6027, 2008. View at: Publisher Site | Google Scholar
  121. A. Cavalleri, C. Toth, C. W. Siders, J. Squier, F. Raski, and J. Kieffer, “Femtosecond structural dynamics in VO 2 during an ultrafast solid-solid phase transition,” Physical Review Letters, vol. 87, no. 23, Article ID 237401, 2001. View at: Publisher Site | Google Scholar
  122. J. Zhu, “Development and applications of MEMS technology,” Semiconductor Science and Technology, vol. 28, no. 1, pp. 29–32, 2003. View at: Google Scholar
  123. M. Gadelhak, MEMS: Design and Fabrication, Crc Press, 2006.
  124. M. Gadelhak, MEMS: Introduction and Fundamentals, Crc Press, 2005.
  125. Z. Han, K. Kohno, H. Fujita, K. Hirakawa, and H. Toshiyoshi, “MEMS reconfigurable metamaterial for terahertz switchable filter and modulator,” Optics Express, vol. 22, no. 18, pp. 21326–21339, 2014. View at: Publisher Site | Google Scholar
  126. C. Della Giovampaola and N. Engheta, “Digital metamaterials,” Nature Materials, vol. 13, no. 12, pp. 1115–1121, 2014. View at: Publisher Site | Google Scholar
  127. S. Liu and T. J. Cui, “Concepts, working principles, and applications of coding and programmable metamaterials,” Advanced Optical Materials, vol. 5, no. 22, Article ID 1700624, 2017. View at: Google Scholar
  128. S. Liu, T. J. Cui, Q. Xu et al., “Anisotropic coding metamaterials and their powerful manipulation of differently polarized terahertz waves,” Light: Science & Applications, vol. 5, no. 5, pp. e16076–e16076, 2016. View at: Google Scholar
  129. T. J. Cui, S. Liu, and L. Zhang, “Information metamaterials and metasurfaces,” Journal of Materials Chemistry C, vol. 5, no. 15, pp. 3644–3668, 2017. View at: Publisher Site | Google Scholar

Copyright © 2019 Z. T. Ma et al. Exclusive licensee Science and Technology Review Publishing House. Distributed under a Creative Commons Attribution License (CC BY 4.0).

3516 Views | 1160 Downloads | 7 Citations
 PDF Download Citation Citation

Altmetric Attention Score

Find out more
 Sign up for content alerts